 |
 |
 |
|
Makita’s PW5001C is precision engineered for professional stone polishing applications. Model PW5001C provides portability and convenience when needed.
The PW5001C is powered by a 7.9 AMP motor with variable speed dial that provides optimum speed settings from 2,000-4,000 RPM. The electronic speed control maintains constant speed under load, and the soft start feature ensures smooth start-ups. It also includes a Ground Fault Circuit Interrupter (GFCI) plug, and an overload switch to protect from armature failure.
The PW5001C weighs just 5.1 lbs. and is built with ease-of-use features for extended operation. The durable housing cover protects the industrial die cast aluminum gear housing. The common fitting accepts the most popular water hose connections, and the three holes at the spindle top evenly spread water to the pad and prevent the pad from clogging.
Includes:
(1) 4" Rubber Pad, Hook & Loop (1) Side Handle (1) Head Cover (1) Spanner Wrench (1) Front Grip (1) Hex Wrench (1) Dust Cover
- Polishing Disc: 4"
- No Load RPM: 2,000 - 4,000
- Voltage: 110 / 120 V
- AMPS: 7.9
- Spindle Thread (11 UNC): 5/8
- Length: 12-1/4"
- Net Weight (lbs.): 4.6
- Shipping Weight (lbs.): 9
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Powerful 7.9 AMP motor and lightweight (4.6 lbs.)
- High power-to-weight ratio (1.72) for reduced operator fatigue
- Soft-Start feature for smooth start-up; variable speed
- Housing cover protects the industrial die cast aluminum gear housing
- 3 holes at the spindle top evenly spread water to the pad and prevents the pad from clogging
- Overload switch to protect armature failure
- Includes a ground fault circuit interrupter (GFCI) plug
- Pre-setting dial (2,000 - 4,000 RPM) for optimum rotating speed
|
|
|
|
|
|
|
|
|
